ESP8266 1 Kanal Relais Sensor Modul
IoT Relais / Sensor Module inkl. ESP8266EX 8Mbit Ram1 Channel Relays Sensor ModuleInternet of Things 1 Kanal Relais Sensor ModulESP8266 Relais Sensor Module Android iOS AppESP8266 1 Kanal Relais Sensor Modul

IoT ESP8266 1 Channel Relais + Sensor Module

17,60 

The ESP8266 IoT 1 channel Relays Sensor Module is a combination of the Internet of Things main features such as switching, measring and controlling Devices. Within 3 simple Steps the IoT Relays Sensor Module Setup is finished

Lieferzeit: 3 Days

48 in stock

Product Description

IoT ESP8266 1 Channel Relais / Sensor Module CE inkl. App WiFi 8 Mbit Flash Sonoff

ESP8266 1 Channel Relais + Sensor Module © androegg

Internet of Things 1 Channel Relays Sensor Modul © androegg

1 Channel Relays Sensor Module inkl. CE © androegg

IoT Relais / Sensor Module inkl. ESP8266EX 8Mbit Ram © androegg

IoT Relais Sensor Module app-download © androegg

ESP8266 Relais Sensor Module Android iOS App © androegg

The ESP8266 IoT 1 channel Relays Sensor Module is a combination of the Internet of Things main features such as switching, measring and controlling Devices. Within 3 simple Steps the IoT Relays Sensor Module Setup is finished:

  • connect ESP8266 Relais Sensor Module to main voltage
  • download IoT Android or iOS App from Google Play or App Store
  • configure Internet of Things Relais Sensor Module

 

No need configuring and compiling own ESP8266 Firmware for the IoT Relays Sensor Module. The Internet of Things Relays Sensor Module comes with an integrated firmware for enabling web server service. Soon as the communication is established required Protocoll will be send from smart phone or tablet to ESP8266 Relays.

ESP8266 IoT Relais Sensor Module

 

The IoT Relais Sensor Module comes with all required Hardware included:

  • easy reachable power connectors, for connecting power cable also Devices
  • integrated glass fuse for IoT Relays protection also device protection
  • integrated power supply for all components such as Relays, ESP8266, integrated Flash
  • LED’s for displaying actual state, mode or errors
  • Pairing Key for easy WiFi / SSID Configuration
  • easy reachable Pins for additional Peripherie
  • 3 pole Sensor Interface (PJ-218A Connector) for connecting analog Sensor

 

 

The IoT Android App, also IoT iOS App is easy to install

  • just scan required IoT Android or IoT iOS App Code form IoT Relais Box
  • Download iOS or Android App from designated source
  • apply IoT App installation

 

Note: The IoT App (mentioned above) supports only a Humidity- / Temperature Sensor (not included).

 

Besides typical IoT control – switching devices – the ESP8266 1 channel Relais Sensor Module supports analoge sensors thru an integrated interface (PJ-218A Connector). The Sensor Interface supports 3.3V, GND and analog Signal line. The analog Signal is forwarded thru the Sensor Interface (small Pin on PJ-218A Connector) to the ESP8266EX AD Converter.

Therefore almost any analog Sensor in a Voltage Range up to 3.3V is suable in combination with the 1 Channel Relays Sensor Module.

 

Note: The maximum rated Signal of the ESP8266EX AD Converter is 1.0V.

Besides the integrated Firmware, the Internet of Things Relays SensorModule is able running own firmware created with any ESP8266 SDK. The intecrated Flash can be flashed with own Firmware up to 8 Mbit.

Similar to every ESP8266EX based IoT Module the ESP8266 must be set to Flash Mode (GPIO0 to GND).

IoT ESP8266 Relays sensor Features:

  • CE Conformity
    Safety:
    EN 60669-1:1999+A1:2002+A2:2008
    Health:
    EN62311:2008
    EMC:
    EN 301 489-1 V1.9.2
    EN 301 489-17 V2.2.1
    Radio:
    EN 300 328 V1.9.1
  • RoHS IEC62321-1:2013
  • Voltage range: 90-250v AC
  • Max current: 10A
  • Max Wattage: 2200W
  • 3 pole Sensor Interface
  • Enclosure Dimensions: 114*52*32mm
  • Frequency: 2.4Ghz
  • Working Temp: -40 ℃ – 125 ℃
  • integr. Glas Fuse
  • support of any ESP8266 SDK
  • free iOS IoT App
  • free Android IoT App
  • Supports fast configure SSID and password connection through EweLink
  • Supports auto-connect to server, register and update device status
  • Supports setting countdown, single and repeat timing tasks
  • integrated ESP8266EX
  • integrated power supply
  • Indicator LED WiFi, on or off state
  • 1 channel IoT Wifi Relais
  • integrated PCB Antenna
  • 802.11 b/g/n Wireless standard
  • Frequency range 2.4GHz-2.5GHz (2400M-2483.5M)
  • UART / I2C Interface
  • GPIO / PWM Interface
  • Operating current 80mA (typ.)
  • Operating temperature -40°~125°
  • Wireless network mode station/softAP/SoftAP+station
  • Security mechanism WPA/WPA2
  • Encryption type WEP/TKIP/AES
  • Network protocols IPv4, TCP/UDP/HTTP/FTP

Reviews

There are no reviews yet.

Be the first to review “IoT ESP8266 1 Channel Relais + Sensor Module”